class-description NEWS COMMUNITY STORE TUTORIALS SIGN UP LOGIN LOGOUT ROKOJORI NEWSLETTER SIGN UP LOGIN LOGOUT NEWS COMMUNITY STORE TUTORIALS TOGGLE FULLSCREEN VOLLBILD AN/AUS StringName
A built-in type for unique strings.

StringNames are immutable strings designed for general-purpose representation of unique names (also called "string interning"). Two StringNames with the same value are the same object. Comparing them is extremely fast compared to regular Strings.

You will usually pass a String to methods expecting a StringName and it will be automatically converted (often at compile time), but in rare cases you can construct a StringName ahead of time with the StringName constructor or, in GDScript, the literal syntax &"example". Manually constructing a StringName allows you to control when the conversion from String occurs or to use the literal and prevent conversions entirely.

See also NodePath, which is a similar concept specifically designed to store pre-parsed scene tree paths.

All of String's methods are available in this class too. They convert the StringName into a string, and they also return a string. This is highly inefficient and should only be used if the string is desired.

 StringName StringName<>():StringName

Constructs an empty StringName.

 StringName StringName<>( StringName from=, from:StringName=, ):StringName

Constructs a StringName as a copy of the given StringName.

 StringName StringName<>( String from=, from:String=, ):StringName

Creates a new StringName from the given String. In GDScript, StringName("example") is equivalent to &"example".

 bool operator !=<>( String right=, right:String=, ):bool

Returns true if this StringName is not equivalent to the given String.

 bool operator !=<>( StringName right=, right:StringName=, ):bool

Returns true if the StringName and right do not refer to the same name. Comparisons between StringNames are much faster than regular String comparisons.

 String operator %<>( Variant right=, right:Variant=, ):String

Formats the StringName, replacing the placeholders with one or more parameters, returning a String. To pass multiple parameters, right needs to be an Array.

For more information, see the GDScript format strings tutorial.

Note: In C#, this operator is not available. Instead, see how to interpolate strings with "$".

 String operator +<>( String right=, right:String=, ):String

Appends right at the end of this StringName, returning a String. This is also known as a string concatenation.

 String operator +<>( StringName right=, right:StringName=, ):String

Appends right at the end of this StringName, returning a String. This is also known as a string concatenation.

 bool operator <<>( StringName right=, right:StringName=, ):bool

Returns true if the left StringName's pointer comes before right. Note that this will not match their Unicode order.

 bool operator <=<>( StringName right=, right:StringName=, ):bool

Returns true if the left StringName's pointer comes before right or if they are the same. Note that this will not match their Unicode order.

 bool operator ==<>( String right=, right:String=, ):bool

Returns true if this StringName is equivalent to the given String.

 bool operator ==<>( StringName right=, right:StringName=, ):bool

Returns true if the StringName and right refer to the same name. Comparisons between StringNames are much faster than regular String comparisons.

 bool operator ><>( StringName right=, right:StringName=, ):bool

Returns true if the left StringName's pointer comes after right. Note that this will not match their Unicode order.

 bool operator >=<>( StringName right=, right:StringName=, ):bool

Returns true if the left StringName's pointer comes after right or if they are the same. Note that this will not match their Unicode order.

 bool begins_with<>( String text=, text:String=, ):bool

Returns true if the string begins with the given text. See also ends_with().

 PackedStringArray bigrams<>():PackedStringArray

Returns an array containing the bigrams (pairs of consecutive characters) of this string.
print("Get up!".bigrams()) # Prints ["Ge", "et", "t ", " u", "up", "p!"]
int bin_to_int<>():int

Converts the string representing a binary number into an int. The string may optionally be prefixed with "0b", and an additional - prefix for negative numbers.
print("101".bin_to_int()) # Prints 5 print("0b101".bin_to_int()) # Prints 5 print("-0b10".bin_to_int()) # Prints -2
String c_escape<>():String

Returns a copy of the string with special characters escaped using the C language standard.

 String c_unescape<>():String

Returns a copy of the string with escaped characters replaced by their meanings. Supported escape sequences are \', \", \\, \a, \b, \f, \n, \r, \t, \v.

Note: Unlike the GDScript parser, this method doesn't support the \uXXXX escape sequence.

 String capitalize<>():String

Changes the appearance of the string: replaces underscores (_) with spaces, adds spaces before uppercase letters in the middle of a word, converts all letters to lowercase, then converts the first one and each one following a space to uppercase.
"move_local_x".capitalize() # Returns "Move Local X" "sceneFile_path".capitalize() # Returns "Scene File Path" "2D, FPS, PNG".capitalize() # Returns "2d, Fps, Png"
int casecmp_to<>( String to=, to:String=, ):int

Performs a case-sensitive comparison to another string. Returns -1 if less than, 1 if greater than, or 0 if equal. "Less than" and "greater than" are determined by the Unicode code points of each string, which roughly matches the alphabetical order.

With different string lengths, returns 1 if this string is longer than the to string, or -1 if shorter. Note that the length of empty strings is always 0.

To get a bool result from a string comparison, use the == operator instead. See also nocasecmp_to(), filecasecmp_to(), and naturalcasecmp_to().

 bool contains<>( String what=, what:String=, ):bool

Returns true if the string contains what. In GDScript, this corresponds to the in operator.
print("Node".contains("de")) # Prints true print("team".contains("I")) # Prints false print("I" in "team") # Prints false

If you need to know where what is within the string, use find(). See also containsn().

 bool containsn<>( String what=, what:String=, ):bool

Returns true if the string contains what, ignoring case.

If you need to know where what is within the string, use findn(). See also contains().

 int count<>( String what=, what:String=, int from=0, from:int=0, int to=0, to:int=0, ):int

Returns the number of occurrences of the substring what between from and to positions. If to is 0, the search continues until the end of the string.

 int countn<>( String what=, what:String=, int from=0, from:int=0, int to=0, to:int=0, ):int

Returns the number of occurrences of the substring what between from and to positions, ignoring case. If to is 0, the search continues until the end of the string.

 String dedent<>():String

Returns a copy of the string with indentation (leading tabs and spaces) removed. See also indent() to add indentation.

 bool ends_with<>( String text=, text:String=, ):bool

Returns true if the string ends with the given text. See also begins_with().

 String erase<>( int position=, position:int=, int chars=1, chars:int=1, ):String

Returns a string with chars characters erased starting from position. If chars goes beyond the string's length given the specified position, fewer characters will be erased from the returned string. Returns an empty string if either position or chars is negative. Returns the original string unmodified if chars is 0.

 int filecasecmp_to<>( String to=, to:String=, ):int

Like naturalcasecmp_to() but prioritizes strings that begin with periods (.) and underscores (_) before any other character. Useful when sorting folders or file names.

To get a bool result from a string comparison, use the == operator instead. See also filenocasecmp_to(), naturalcasecmp_to(), and casecmp_to().

 int filenocasecmp_to<>( String to=, to:String=, ):int

Like naturalnocasecmp_to() but prioritizes strings that begin with periods (.) and underscores (_) before any other character. Useful when sorting folders or file names.

To get a bool result from a string comparison, use the == operator instead. See also filecasecmp_to(), naturalnocasecmp_to(), and nocasecmp_to().

 int find<>( String what=, what:String=, int from=0, from:int=0, ):int

Returns the index of the first occurrence of what in this string, or -1 if there are none. The search's start can be specified with from, continuing to the end of the string.
print("Team".find("I")) # Prints -1 print("Potato".find("t")) # Prints 2 print("Potato".find("t", 3)) # Prints 4 print("Potato".find("t", 5)) # Prints -1

Note: If you just want to know whether the string contains what, use contains(). In GDScript, you may also use the in operator.

 int findn<>( String what=, what:String=, int from=0, from:int=0, ):int

Returns the index of the first case-insensitive occurrence of what in this string, or -1 if there are none. The starting search index can be specified with from, continuing to the end of the string.

 String format<>( Variant values=, values:Variant=, String placeholder="{_}", placeholder:String="{_}", ):String

Formats the string by replacing all occurrences of placeholder with the elements of values.

values can be a Dictionary, an Array, or an Object. Any underscores in placeholder will be replaced with the corresponding keys in advance. Array elements use their index as keys.

# Prints "Waiting for Godot is a play by Samuel Beckett, and Godot Engine is named after it." var use_array_values = "Waiting for {0} is a play by {1}, and {0} Engine is named after it." print(use_array_values.format(["Godot", "Samuel Beckett"])) # Prints "User 42 is Godot." print("User {id} is {name}.".format({"id": 42, "name": "Godot"}))

Some additional handling is performed when values is an Array. If placeholder does not contain an underscore, the elements of the values array will be used to replace one occurrence of the placeholder in order; If an element of values is another 2-element array, it'll be interpreted as a key-value pair.

# Prints "User 42 is Godot." print("User {} is {}.".format([42, "Godot"], "{}")) print("User {id} is {name}.".format([["id", 42], ["name", "Godot"]]))

When passing an Object, the property names from Object.get_property_list() are used as keys.

# Prints "Visible true, position (0, 0)" var node = Node2D.new() print("Visible {visible}, position {position}".format(node))

See also the GDScript format string tutorial.

Note: Each replacement is done sequentially for each element of values, not all at once. This means that if any element is inserted and it contains another placeholder, it may be changed by the next replacement. While this can be very useful, it often causes unexpected results. If not necessary, make sure values's elements do not contain placeholders.

print("{0} {1}".format(["{1}", "x"])) # Prints "x x" print("{0} {1}".format(["x", "{0}"])) # Prints "x {0}" print("{a} {b}".format({"a": "{b}", "b": "c"})) # Prints "c c" print("{a} {b}".format({"b": "c", "a": "{b}"})) # Prints "{b} c"

Note: In C#, it's recommended to interpolate strings with "$", instead.

 String get_base_dir<>():String

If the string is a valid file path, returns the base directory name.
var dir_path = "/path/to/file.txt".get_base_dir() # dir_path is "/path/to"
String get_basename<>():String

If the string is a valid file path, returns the full file path, without the extension.
var base = "/path/to/file.txt".get_basename() # base is "/path/to/file"
String get_extension<>():String

If the string is a valid file name or path, returns the file extension without the leading period (.). Otherwise, returns an empty string.
var a = "/path/to/file.txt".get_extension() # a is "txt" var b = "cool.txt".get_extension() # b is "txt" var c = "cool.font.tres".get_extension() # c is "tres" var d = ".pack1".get_extension() # d is "pack1" var e = "file.txt.".get_extension() # e is "" var f = "file.txt..".get_extension() # f is "" var g = "txt".get_extension() # g is "" var h = "".get_extension() # h is ""
String get_file<>():String

If the string is a valid file path, returns the file name, including the extension.
var file = "/path/to/icon.png".get_file() # file is "icon.png"
String get_slice<>( String delimiter=, delimiter:String=, int slice=, slice:int=, ):String

Splits the string using a delimiter and returns the substring at index slice. Returns the original string if delimiter does not occur in the string. Returns an empty string if the slice does not exist.

This is faster than split(), if you only need one substring.

print("i/am/example/hi".get_slice("/", 2)) # Prints "example"
int get_slice_count<>( String delimiter=, delimiter:String=, ):int

Returns the total number of slices when the string is split with the given delimiter (see split()).

 String get_slicec<>( int delimiter=, delimiter:int=, int slice=, slice:int=, ):String

Splits the string using a Unicode character with code delimiter and returns the substring at index slice. Returns an empty string if the slice does not exist.

This is faster than split(), if you only need one substring.

 int hash<>():int

Returns the 32-bit hash value representing the string's contents.

Note: Strings with equal hash values are not guaranteed to be the same, as a result of hash collisions. On the contrary, strings with different hash values are guaranteed to be different.

 PackedByteArray hex_decode<>():PackedByteArray

Decodes a hexadecimal string as a PackedByteArray.
var text = "hello world" var encoded = text.to_utf8_buffer().hex_encode() # outputs "68656c6c6f20776f726c64" print(buf.hex_decode().get_string_from_utf8())
int hex_to_int<>():int

Converts the string representing a hexadecimal number into an int. The string may be optionally prefixed with "0x", and an additional - prefix for negative numbers.
print("0xff".hex_to_int()) # Prints 255 print("ab".hex_to_int()) # Prints 171
String indent<>( String prefix=, prefix:String=, ):String

Indents every line of the string with the given prefix. Empty lines are not indented. See also dedent() to remove indentation.

For example, the string can be indented with two tabulations using "\t\t", or four spaces using "    ".

 String insert<>( int position=, position:int=, String what=, what:String=, ):String

Inserts what at the given position in the string.

 bool is_absolute_path<>():bool

Returns true if the string is a path to a file or directory, and its starting point is explicitly defined. This method is the opposite of is_relative_path().

This includes all paths starting with "res://", "user://", "C:\", "/", etc.

 bool is_empty<>():bool

Returns true if the string's length is 0 (""). See also length().

 bool is_relative_path<>():bool

Returns true if the string is a path, and its starting point is dependent on context. The path could begin from the current directory, or the current Node (if the string is derived from a NodePath), and may sometimes be prefixed with "./". This method is the opposite of is_absolute_path().

 bool is_subsequence_of<>( String text=, text:String=, ):bool

Returns true if all characters of this string can be found in text in their original order.
var text = "Wow, incredible!" print("inedible".is_subsequence_of(text)) # Prints true print("Word!".is_subsequence_of(text)) # Prints true print("Window".is_subsequence_of(text)) # Prints false print("".is_subsequence_of(text)) # Prints true
bool is_subsequence_ofn<>( String text=, text:String=, ):bool

Returns true if all characters of this string can be found in text in their original order, ignoring case.

 bool is_valid_ascii_identifier<>():bool

Returns true if this string is a valid ASCII identifier. A valid ASCII identifier may contain only letters, digits, and underscores (_), and the first character may not be a digit.
print("node_2d".is_valid_ascii_identifier()) # Prints true print("TYPE_FLOAT".is_valid_ascii_identifier()) # Prints true print("1st_method".is_valid_ascii_identifier()) # Prints false print("MyMethod#2".is_valid_ascii_identifier()) # Prints false

See also is_valid_unicode_identifier().

 bool is_valid_filename<>():bool

Returns true if this string does not contain characters that are not allowed in file names (: / \ ? * " | % < >).

 bool is_valid_float<>():bool

Returns true if this string represents a valid floating-point number. A valid float may contain only digits, one decimal point (.), and the exponent letter (e). It may also be prefixed with a positive (+) or negative (-) sign. Any valid integer is also a valid float (see is_valid_int()). See also to_float().
print("1.7".is_valid_float()) # Prints true print("24".is_valid_float()) # Prints true print("7e3".is_valid_float()) # Prints true print("Hello".is_valid_float()) # Prints false
bool is_valid_hex_number<>( bool with_prefix=false, with_prefix:bool=false, ):bool

Returns true if this string is a valid hexadecimal number. A valid hexadecimal number only contains digits or letters A to F (either uppercase or lowercase), and may be prefixed with a positive (+) or negative (-) sign.

If with_prefix is true, the hexadecimal number needs to prefixed by "0x" to be considered valid.

print("A08E".is_valid_hex_number()) # Prints true print("-AbCdEf".is_valid_hex_number()) # Prints true print("2.5".is_valid_hex_number()) # Prints false print("0xDEADC0DE".is_valid_hex_number(true)) # Prints true
bool is_valid_html_color<>():bool

Returns true if this string is a valid color in hexadecimal HTML notation. The string must be a hexadecimal value (see is_valid_hex_number()) of either 3, 4, 6 or 8 digits, and may be prefixed by a hash sign (#). Other HTML notations for colors, such as names or hsl(), are not considered valid. See also Color.html().

 bool is_valid_identifier<>():bool

Deprecated: Use is_valid_ascii_identifier() instead.

Returns true if this string is a valid identifier. A valid identifier may contain only letters, digits and underscores (_), and the first character may not be a digit.

print("node_2d".is_valid_identifier()) # Prints true print("TYPE_FLOAT".is_valid_identifier()) # Prints true print("1st_method".is_valid_identifier()) # Prints false print("MyMethod#2".is_valid_identifier()) # Prints false
bool is_valid_int<>():bool

Returns true if this string represents a valid integer. A valid integer only contains digits, and may be prefixed with a positive (+) or negative (-) sign. See also to_int().
print("7".is_valid_int()) # Prints true print("1.65".is_valid_int()) # Prints false print("Hi".is_valid_int()) # Prints false print("+3".is_valid_int()) # Prints true print("-12".is_valid_int()) # Prints true
bool is_valid_ip_address<>():bool

Returns true if this string represents a well-formatted IPv4 or IPv6 address. This method considers reserved IP addresses such as "0.0.0.0" and "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff" as valid.

 bool is_valid_unicode_identifier<>():bool

Returns true if this string is a valid Unicode identifier.

A valid Unicode identifier must begin with a Unicode character of class XID_Start or "_", and may contain Unicode characters of class XID_Continue in the other positions.

print("node_2d".is_valid_unicode_identifier()) # Prints true print("1st_method".is_valid_unicode_identifier()) # Prints false print("MyMethod#2".is_valid_unicode_identifier()) # Prints false print("állóképesség".is_valid_unicode_identifier()) # Prints true print("выносливость".is_valid_unicode_identifier()) # Prints true print("体力".is_valid_unicode_identifier()) # Prints true

See also is_valid_ascii_identifier().

Note: This method checks identifiers the same way as GDScript. See TextServer.is_valid_identifier() for more advanced checks.

 String join<>( PackedStringArray parts=, parts:PackedStringArray=, ):String

Returns the concatenation of parts' elements, with each element separated by the string calling this method. This method is the opposite of split().
var fruits = ["Apple", "Orange", "Pear", "Kiwi"] print(", ".join(fruits)) # Prints "Apple, Orange, Pear, Kiwi" print("---".join(fruits)) # Prints "Apple---Orange---Pear---Kiwi"
String json_escape<>():String

Returns a copy of the string with special characters escaped using the JSON standard. Because it closely matches the C standard, it is possible to use c_unescape() to unescape the string, if necessary.

 String left<>( int length=, length:int=, ):String

Returns the first length characters from the beginning of the string. If length is negative, strips the last length characters from the string's end.
print("Hello World!".left(3)) # Prints "Hel" print("Hello World!".left(-4)) # Prints "Hello Wo"
int length<>():int

Returns the number of characters in the string. Empty strings ("") always return 0. See also is_empty().

 String lpad<>( int min_length=, min_length:int=, String character=" ", character:String=" ", ):String

Formats the string to be at least min_length long by adding characters to the left of the string, if necessary. See also rpad().

 String lstrip<>( String chars=, chars:String=, ):String

Removes a set of characters defined in chars from the string's beginning. See also rstrip().

Note: chars is not a prefix. Use trim_prefix() to remove a single prefix, rather than a set of characters.

 bool match<>( String expr=, expr:String=, ):bool

Does a simple expression match (also called "glob" or "globbing"), where * matches zero or more arbitrary characters and ? matches any single character except a period (.). An empty string or empty expression always evaluates to false.

 bool matchn<>( String expr=, expr:String=, ):bool

Does a simple case-insensitive expression match, where * matches zero or more arbitrary characters and ? matches any single character except a period (.). An empty string or empty expression always evaluates to false.

 PackedByteArray md5_buffer<>():PackedByteArray

Returns the MD5 hash of the string as a PackedByteArray.

 String md5_text<>():String

Returns the MD5 hash of the string as another String.

 int naturalcasecmp_to<>( String to=, to:String=, ):int

Performs a case-sensitive, natural order comparison to another string. Returns -1 if less than, 1 if greater than, or 0 if equal. "Less than" or "greater than" are determined by the Unicode code points of each string, which roughly matches the alphabetical order.

When used for sorting, natural order comparison orders sequences of numbers by the combined value of each digit as is often expected, instead of the single digit's value. A sorted sequence of numbered strings will be ["1", "2", "3", ...], not ["1", "10", "2", "3", ...].

With different string lengths, returns 1 if this string is longer than the to string, or -1 if shorter. Note that the length of empty strings is always 0.

To get a bool result from a string comparison, use the == operator instead. See also naturalnocasecmp_to(), filecasecmp_to(), and nocasecmp_to().

 int naturalnocasecmp_to<>( String to=, to:String=, ):int

Performs a case-insensitive, natural order comparison to another string. Returns -1 if less than, 1 if greater than, or 0 if equal. "Less than" or "greater than" are determined by the Unicode code points of each string, which roughly matches the alphabetical order. Internally, lowercase characters are converted to uppercase for the comparison.

When used for sorting, natural order comparison orders sequences of numbers by the combined value of each digit as is often expected, instead of the single digit's value. A sorted sequence of numbered strings will be ["1", "2", "3", ...], not ["1", "10", "2", "3", ...].

With different string lengths, returns 1 if this string is longer than the to string, or -1 if shorter. Note that the length of empty strings is always 0.

To get a bool result from a string comparison, use the == operator instead. See also naturalcasecmp_to(), filenocasecmp_to(), and casecmp_to().

 int nocasecmp_to<>( String to=, to:String=, ):int

Performs a case-insensitive comparison to another string. Returns -1 if less than, 1 if greater than, or 0 if equal. "Less than" or "greater than" are determined by the Unicode code points of each string, which roughly matches the alphabetical order. Internally, lowercase characters are converted to uppercase for the comparison.

With different string lengths, returns 1 if this string is longer than the to string, or -1 if shorter. Note that the length of empty strings is always 0.

To get a bool result from a string comparison, use the == operator instead. See also casecmp_to(), filenocasecmp_to(), and naturalnocasecmp_to().

 String pad_decimals<>( int digits=, digits:int=, ):String

Formats the string representing a number to have an exact number of digits after the decimal point.

 String pad_zeros<>( int digits=, digits:int=, ):String

Formats the string representing a number to have an exact number of digits before the decimal point.

 String path_join<>( String file=, file:String=, ):String

Concatenates file at the end of the string as a subpath, adding / if necessary.

Example: "this/is".path_join("path") == "this/is/path".

 String repeat<>( int count=, count:int=, ):String

Repeats this string a number of times. count needs to be greater than 0. Otherwise, returns an empty string.

 String replace<>( String what=, what:String=, String forwhat=, forwhat:String=, ):String

Replaces all occurrences of what inside the string with the given forwhat.

 String replacen<>( String what=, what:String=, String forwhat=, forwhat:String=, ):String

Replaces all case-insensitive occurrences of what inside the string with the given forwhat.

 String reverse<>():String

Returns the copy of this string in reverse order. This operation works on unicode codepoints, rather than sequences of codepoints, and may break things like compound letters or emojis.

 int rfind<>( String what=, what:String=, int from=-1, from:int=-1, ):int

Returns the index of the last occurrence of what in this string, or -1 if there are none. The search's start can be specified with from, continuing to the beginning of the string. This method is the reverse of find().

 int rfindn<>( String what=, what:String=, int from=-1, from:int=-1, ):int

Returns the index of the last case-insensitive occurrence of what in this string, or -1 if there are none. The starting search index can be specified with from, continuing to the beginning of the string. This method is the reverse of findn().

 String right<>( int length=, length:int=, ):String

Returns the last length characters from the end of the string. If length is negative, strips the first length characters from the string's beginning.
print("Hello World!".right(3)) # Prints "ld!" print("Hello World!".right(-4)) # Prints "o World!"
String rpad<>( int min_length=, min_length:int=, String character=" ", character:String=" ", ):String

Formats the string to be at least min_length long, by adding characters to the right of the string, if necessary. See also lpad().

 PackedStringArray rsplit<>( String delimiter="", delimiter:String="", bool allow_empty=true, allow_empty:bool=true, int maxsplit=0, maxsplit:int=0, ):PackedStringArray

Splits the string using a delimiter and returns an array of the substrings, starting from the end of the string. The splits in the returned array appear in the same order as the original string. If delimiter is an empty string, each substring will be a single character.

If allow_empty is false, empty strings between adjacent delimiters are excluded from the array.

If maxsplit is greater than 0, the number of splits may not exceed maxsplit. By default, the entire string is split, which is mostly identical to split().

var some_string = "One,Two,Three,Four" var some_array = some_string.rsplit(",", true, 1) print(some_array.size()) # Prints 2 print(some_array[0]) # Prints "One,Two,Three" print(some_array[1]) # Prints "Four"
String rstrip<>( String chars=, chars:String=, ):String

Removes a set of characters defined in chars from the string's end. See also lstrip().

Note: chars is not a suffix. Use trim_suffix() to remove a single suffix, rather than a set of characters.

 PackedByteArray sha1_buffer<>():PackedByteArray

Returns the SHA-1 hash of the string as a PackedByteArray.

 String sha1_text<>():String

Returns the SHA-1 hash of the string as another String.

 PackedByteArray sha256_buffer<>():PackedByteArray

Returns the SHA-256 hash of the string as a PackedByteArray.

 String sha256_text<>():String

Returns the SHA-256 hash of the string as another String.

 float similarity<>( String text=, text:String=, ):float

Returns the similarity index (Sørensen-Dice coefficient) of this string compared to another. A result of 1.0 means totally similar, while 0.0 means totally dissimilar.
print("ABC123".similarity("ABC123")) # Prints 1.0 print("ABC123".similarity("XYZ456")) # Prints 0.0 print("ABC123".similarity("123ABC")) # Prints 0.8 print("ABC123".similarity("abc123")) # Prints 0.4
String simplify_path<>():String

If the string is a valid file path, converts the string into a canonical path. This is the shortest possible path, without "./", and all the unnecessary ".." and "/".
var simple_path = "./path/to///../file".simplify_path() print(simple_path) # Prints "path/file"
PackedStringArray split<>( String delimiter="", delimiter:String="", bool allow_empty=true, allow_empty:bool=true, int maxsplit=0, maxsplit:int=0, ):PackedStringArray

Splits the string using a delimiter and returns an array of the substrings. If delimiter is an empty string, each substring will be a single character. This method is the opposite of join().

If allow_empty is false, empty strings between adjacent delimiters are excluded from the array.

If maxsplit is greater than 0, the number of splits may not exceed maxsplit. By default, the entire string is split.

var some_array = "One,Two,Three,Four".split(",", true, 2) print(some_array.size()) # Prints 3 print(some_array[0]) # Prints "One" print(some_array[1]) # Prints "Two" print(some_array[2]) # Prints "Three,Four"

Note: If you only need one substring from the array, consider using get_slice() which is faster. If you need to split strings with more complex rules, use the RegEx class instead.

 PackedFloat64Array split_floats<>( String delimiter=, delimiter:String=, bool allow_empty=true, allow_empty:bool=true, ):PackedFloat64Array

Splits the string into floats by using a delimiter and returns a PackedFloat64Array.

If allow_empty is false, empty or invalid float conversions between adjacent delimiters are excluded.

var a = "1,2,4.5".split_floats(",") # a is [1.0, 2.0, 4.5] var c = "1| ||4.5".split_floats("|") # c is [1.0, 0.0, 0.0, 4.5] var b = "1| ||4.5".split_floats("|", false) # b is [1.0, 4.5]
String strip_edges<>( bool left=true, left:bool=true, bool right=true, right:bool=true, ):String

Strips all non-printable characters from the beginning and the end of the string. These include spaces, tabulations (\t), and newlines (\n \r).

If left is false, ignores the string's beginning. Likewise, if right is false, ignores the string's end.

 String strip_escapes<>():String

Strips all escape characters from the string. These include all non-printable control characters of the first page of the ASCII table (values from 0 to 31), such as tabulation (\t) and newline (\n, \r) characters, but not spaces.

 String substr<>( int from=, from:int=, int len=-1, len:int=-1, ):String

Returns part of the string from the position from with length len. If len is -1 (as by default), returns the rest of the string starting from the given position.

 PackedByteArray to_ascii_buffer<>():PackedByteArray

Converts the string to an ASCII/Latin-1 encoded PackedByteArray. This method is slightly faster than to_utf8_buffer(), but replaces all unsupported characters with spaces. This is the inverse of PackedByteArray.get_string_from_ascii().

 String to_camel_case<>():String

Returns the string converted to camelCase.

 float to_float<>():float

Converts the string representing a decimal number into a float. This method stops on the first non-number character, except the first decimal point (.) and the exponent letter (e). See also is_valid_float().
var a = "12.35".to_float() # a is 12.35 var b = "1.2.3".to_float() # b is 1.2 var c = "12xy3".to_float() # c is 12.0 var d = "1e3".to_float() # d is 1000.0 var e = "Hello!".to_float() # e is 0.0
int to_int<>():int

Converts the string representing an integer number into an int. This method removes any non-number character and stops at the first decimal point (.). See also is_valid_int().
var a = "123".to_int() # a is 123 var b = "x1y2z3".to_int() # b is 123 var c = "-1.2.3".to_int() # c is -1 var d = "Hello!".to_int() # d is 0
String to_lower<>():String

Returns the string converted to lowercase.

 String to_pascal_case<>():String

Returns the string converted to PascalCase.

 String to_snake_case<>():String

Returns the string converted to snake_case.

Note: Numbers followed by a single letter are not separated in the conversion to keep some words (such as "2D") together.

"Node2D".to_snake_case() # Returns "node_2d" "2nd place".to_snake_case() # Returns "2_nd_place" "Texture3DAssetFolder".to_snake_case() # Returns "texture_3d_asset_folder"
String to_upper<>():String

Returns the string converted to UPPERCASE.

 PackedByteArray to_utf8_buffer<>():PackedByteArray

Converts the string to a UTF-8 encoded PackedByteArray. This method is slightly slower than to_ascii_buffer(), but supports all UTF-8 characters. For most cases, prefer using this method. This is the inverse of PackedByteArray.get_string_from_utf8().

 PackedByteArray to_utf16_buffer<>():PackedByteArray

Converts the string to a UTF-16 encoded PackedByteArray. This is the inverse of PackedByteArray.get_string_from_utf16().

 PackedByteArray to_utf32_buffer<>():PackedByteArray

Converts the string to a UTF-32 encoded PackedByteArray. This is the inverse of PackedByteArray.get_string_from_utf32().

 PackedByteArray to_wchar_buffer<>():PackedByteArray

Converts the string to a wide character (wchar_t, UTF-16 on Windows, UTF-32 on other platforms) encoded PackedByteArray. This is the inverse of PackedByteArray.get_string_from_wchar().

 String trim_prefix<>( String prefix=, prefix:String=, ):String

Removes the given prefix from the start of the string, or returns the string unchanged.

 String trim_suffix<>( String suffix=, suffix:String=, ):String

Removes the given suffix from the end of the string, or returns the string unchanged.

 int unicode_at<>( int at=, at:int=, ):int

Returns the character code at position at.

 String uri_decode<>():String

Decodes the string from its URL-encoded format. This method is meant to properly decode the parameters in a URL when receiving an HTTP request. See also uri_encode().
var url = "$DOCS_URL/?highlight=Godot%20Engine%3%docs" print(url.uri_decode()) # Prints "$DOCS_URL/?highlight=Godot Engine:docs"
String uri_encode<>():String

Encodes the string to URL-friendly format. This method is meant to properly encode the parameters in a URL when sending an HTTP request. See also uri_decode().
var prefix = "$DOCS_URL/?highlight=" var url = prefix + "Godot Engine:docs".uri_encode() print(url) # Prints "$DOCS_URL/?highlight=Godot%20Engine%3%docs"
String validate_filename<>():String

Returns a copy of the string with all characters that are not allowed in is_valid_filename() replaced with underscores.

 String validate_node_name<>():String

Returns a copy of the string with all characters that are not allowed in Node.name (. : @ / " %) replaced with underscores.

 String xml_escape<>( bool escape_quotes=false, escape_quotes:bool=false, ):String

Returns a copy of the string with special characters escaped using the XML standard. If escape_quotes is true, the single quote (') and double quote (") characters are also escaped.

 String xml_unescape<>():String

Returns a copy of the string with escaped characters replaced by their meanings according to the XML standard.


All social media brands are registrated trademarks and belong to their respective owners.





CONTACT IMPRINT TERMS OF USE PRIVACY © ROKOROJI ® 2021 rokojori.com CONTACT IMPRINT TERMS OF USE PRIVACY © ROKOROJI ® 2021 rokojori.com We are using cookies on this site. Read more... Wir benutzen Cookies auf dieser Seite. Mehr lesen...